General Information

Ignition, Servicing

Ignition system, general information
- Only components which specifically relate to ignition system are dealt with here. The other components of the injection and ignition system.
- For trouble-free operation of the electrical components a voltage of at least 11.5 V is necessary.
- It is possible that the control module will recognize a malfunction and store a DTC during some tests. After completing all tests and repairs, DTC memory should therefore be checked and erased if necessary "Guided Functions" .
- If the engine only starts briefly and then turns off again after troubleshooting, repair or checking of the components, it may be that the immobilizer is blocking the Engine Control Module (ECM). Control module must then be adapted if necessary "Guided Functions" .