Body Emblem

Name Plates

--> [ Rear Name Plate Dimensions ]

--> [ Fender Name Plate Dimensions, Individual ]

--> [ Name Plate Dimensions, Fender, R-Line ]

Rear Name Plate Dimensions

1 Dimension - a - = 40 mm

• From the outer edge of the rear lid to the name plate.

2 Dimension - b - = 20 mm

• From upper edge of rear lid up to name plate.

Fender Name Plate Dimensions, Individual

Left Name Plate Dimensions

1 Dimension - a - = 479 mm

• Transfer - dimension a - from the bottom edge of the name plate to the fender

2 Dimension - b - = 10 mm

• Transfer the - dimension b - from the end point of - dimension a - out to the corner point of the emblem.

3 Dimension - c - = 83 mm

• Check the distance between the upper edge of the name plate to the edge of the fender with - dimension c -.

4 Dimension - d - = 112 mm

• Check the distance between the lower edge of the name plate to the edge of the fender with - dimension d -.

Right Name Plate Dimensions

1 Dimension - a - = 481 mm

• Measure - dimension a - from the bottom edge of the fender out on the fender.

2 Dimension - b - = 30 mm

• Transfer the - dimension b - from the end point of - dimension a - out to the corner point of the emblem.

3 Dimension - c - = 103 mm

• Check the distance between the upper edge of the name plate to the edge of the fender with - dimension c -.

4 Dimension - d - = 112 mm

• Check the distance between the lower edge of the name plate to the edge of the fender with - dimension d -.

Name Plate Dimensions, Fender, R-Line

• The dimensions for the R-line fender name plate apply to the left side. It can also be applied to the right side.

Name Plate Dimensions

• Dimension - b - and dimension - c - specify the inclination of the name plate. The name plate is installed parallel to the lower edge of the fender.

1 Dimension - a - = 72 mm

• From the lower edge of the fender to the corner of the name plate

2 Dimension - b - = 473 mm

• From the lower rear edge of the fender to the - dimension a -.

3 Dimension - c - = 473 mm.

• From the lower front edge of the fender to the corner of the name plate