Clutch Overview, Sachs

Clutch Overview, Sachs






1 Dual Mass Flywheel

• Make sure it fits securely on the centering pins.

• Keep the clutch lining contact surface free of grooves, oil and grease.

2 Clutch Disc

• Only replace together with the pressure plate.

• Removing and installing, refer to => [ Clutch, Sachs ] Clutch, Sachs.

• Installed position, refer to => [ Clutch Disc Installed Position ] Clutch, Sachs.

3 Pressure Plate

• With an adjustment mechanism.

• Only replace together with the clutch disc.

• Removing and installing, refer to => [ Clutch, Sachs ] Clutch, Sachs

• Check the ends of the diaphragm spring, refer to => [ Check the Ends of the Diaphragm Spring ] Clutch, Sachs.

• Check the spring and rivet connections, refer to => [ Check the Spring and Rivet Connections ] Clutch, Sachs.

• Approximately from 05.11: Release bearing with an additional plastic washer. Refer to => [ Approximately from 05.11: Release Bearing with an Additional Plastic Washer ] Clutch Release Mechanism Overview, and a adapted pressure plate, refer to => [ Only for release bearings with an additional plastic washer: Pressure plate diaphragm spring () with a slightly lower installed height ] Clutch Release Mechanism Overview.

4 Bolt

• M6 - 13 Nm

• M7 - 20 Nm

• Loosen and tighten in small steps and in a diagonal sequence.