Sun Shade Cables, Installing

Sun Shade Cables, Installing






- Slide sun shade - 3 - into guide rails - 1 - as far as "stop".

- Slide cables into guide rails - 1 - as far as "stop" - arrow -. Use a 20 cm long screwdriver 20 cm- 2 - whose circumference fits into the guide tube to do this.

• All screws are microencapsulated and must always be replaced.






- Place intermediate shaft - 3 - in mount - 4 - and press cover - 2 - on.

- Tighten bolts - 1 -. Tightening specification: 4.5 Nm.

Install in reverse order of removal.

- Remove supports, close roof and install rail and tensioned headliner.