Sun Shade, Installing

Sun Shade, Installing

• Install cables and sun shade with an additional technician.

• The cables and sun shade must be guided parallel into guide rails.






- Hold the cable mounts - 2 and 3 - together - a arrows - and guide - arrow b - them into rear guide rails - 1 -.






- Slide sun shade - 3 - into guide rail - 1 -.

- Using a 20 cm screwdriver - 2 -, slide the cables up to the stop - arrow - in the guide rails - 1 -.

• All screws are microencapsulated and must always be replaced.






- Place intermediate shaft - 3 - in mount - 4 - and press cover - 2 - on.

- Tighten bolts - 1 -. Tightening specification: 4.5 Nm.

Install in reverse order of removal.

- Remove supports, close roof and install rail and tensioned headliner.