Headlamp Mounting Tabs, Repairing

Headlamp Mounting Tabs, Repairing


• Note usage and safety notes for halogen lamps, refer to => [ Application and Safety
Notes ] Halogen Headlamps.


Always follow usage and safety information for gas discharge lamps. Refer to => [ HID Headlamps, Usage and Safety Precautions ] Service Precautions!

If the upper headlamp mounting tab - A -, the outer headlamp mounting tab - C - or the lower headlamp mounting tab - B - should be damaged or broken off, they can be replaced by installing the repair set. It is not necessary to replace the entire headlamp.






• Check whether there is no further damage on the headlamp that makes installation of the repair set superfluous.

• There are two different repair sets, one for the left and one for the right headlamp.

• Each repair set contains the corresponding top, side and lower headlamp mounting tabs, three mounting bolts and two banjo fittings.

• The following illustrations depict replacement of mounting tabs at right headlamp.

• Replacement of securing lugs on left headlamp and on right headlamp are performed analogously.

• During removal and installation, leave ignition key with remote control inside the vehicle to prevent the doors from locking and possibly activating the Coming Home / Leaving Home functions on its own.

Upper mounting tab, repairing, refer to => [ Upper Mounting Tab, Repairing ] Upper Mounting Tab, Repairing.

Lower mounting tab, repairing, refer to => [ Lower Mounting Tab, Repairing ] Lower Mounting Tab, Repairing.

Side mounting tab, repairing, refer to => [ Side Mounting Tab, Repairing ] Side Mounting Tab, Repairing.