Rear Lid Tail Lamp Bulb Holder

Rear Lid Tail Lamp Bulb Holder

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Pry the tail lamp service cover out of the rear lid trim.

- Disconnect the connector - 2 - from the bulb holder - 1 -.






- Push both retaining tabs - arrows B - outward and remove lamp carrier from tail lamp housing.

Left Rear Fog Lamp (L46) 12V, P 21 W

Right Back-Up Lamp (M17) 12V, P 21 W

Installation

Install in reverse order of removal, noting the following:

- Insert connector into lamp carrier until it engages audibly.