Diagram 36/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Exhaust Flap Valve 1, Camshaft Adjustment Valves, Evaporative Emission (EVAP) Canister Purge Regulator Valve 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J623 - Engine Control Module (ECM) Overview of Control Modules

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations

N205 - Camshaft Adjustment Valve 1 Locations

N316 - Intake Manifold Runner Control (IMRC) Valve Locations

N318 - Camshaft Adjustment Valve 1 (exhaust) Locations

N321 - Exhaust Flap Valve 1 Locations

T2ds - Double Connector

T2dt - Double Connector

T2du - Double Connector

T2fk - Double Connector

T2fl - Double Connector

T4x - 4-Pin Connector, on coolant fan, bottom left

T14b - 14-Pin Connector, near starter Overview of Connector Stations and Connectors

T121 - 121-Pin Connector

(D111) - Connection 9 (in engine compartment wiring harness)

(D119) - Connection 17 (in engine compartment wiring harness)

(D180) - Connection (87a) (in engine compartment wiring harness)

(D181) - Connection 2 (87a) (in engine compartment wiring harness)

* - Coolant Fan Connector

Previous Diagram 36/10 (Tracks 113-126)

Next Diagram 36/12 (Tracks 141-154)