Diagram 36/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster, Data Bus On Board Diagnostic Interface, Data Link Connector (DLC), Electronic Power Control (EPC) Warning Lamp, Multi-function Indicator (MFA)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J119 - Multi-function Indicator

J285 - Instrument Cluster Control Module Overview of Control Modules

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J533 - Data Bus On Board Diagnostic Interface, in left footwell, near center console Overview of Control Modules

K132 - Electronic Power Control (EPC) Warning Lamp

T12n - 12-Pin Connector

T16 - 16-Pin Connector, data link connector (DLC), under instrument panel, left

T20 - 20-Pin Connector

T36 - 36-Pin Connector

(376) - Ground Connection 11 (in main wiring harness)

(381) - Ground Connection 16 (in main wiring harness)

(640) - Ground Connection (in engine compartment, left) Overview of Ground Connections in Engine Compartment

(A76) - Diagnosis Wire K Connection (in instrument panel wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

* - Models with extended service intervals

Previous Diagram 36/18 (Tracks 225-238)

Next Diagram 36/20 (Tracks 253-266)