Diagram 17/4 (Tracks 29-42)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Airbag Control Module, Driver's and Front Passenger's Side Airbag Crash Sensor, Driver's and Front Passenger's Side Airbag Igniter
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
G179 - Driver's Side Airbag Crash Sensor Front Door Crash Sensors
G180 - Front Passenger's Side Airbag Crash Sensor Front Door Crash Sensors
J234 - Airbag Control Module Overview of Control Modules
J519 - Vehicle Electrical System Control Module Overview of Control Modules
N131 - Front Passenger's Airbag Igniter 1 Airbag Component Locations
N199 - Driver's Side Airbag Igniter Airbag Component Locations
N200 - Front Passenger's Side Airbag Igniter Airbag Component Locations
T2eh - Double Connector
T2ei - Double Connector
T3k - 3-Pin Connector, yellow, below driver's seat
T3l - 3-Pin Connector, yellow, below front passenger's seat
T3ao - 3-Pin Connector
T3ap - 3-Pin Connector
T3q - 3-Pin Connector
T28 - 28-Pin Connector, connector station A-pillar, left
T28a - 28-Pin Connector, connector station A-pillar, left
T75 - 75-Pin Connector
(312) - Ground Connection 2 (in airbag wiring harness)
* - Not applicable to US/CDN
Previous Diagram 17/3 (Tracks 15-28)
Next Diagram 17/5 (Tracks 43-56)