Right Trim, Seat With Pass-Through

Front Seats

Right Trim, Seat with Pass-Through

Removal

- Remove front seat: => [ Front Seat ] Front Seat

- Press metal tab of securing clip - 2 - inward using a small screwdriver and pull off handle - 3 - from adjustment lever - 1 -.

• For the sake of illustration, securing clip is depicted as removed in the illustration.

- Remove the clip - 2 - from adjusting lever - 1 -.

- Grasp with assembly tool (3399) behind backrest release lever - 4 -.

- Pry assembly tool (3399) outward - arrow A - and remove backrest release lever from seat.

- Using assembly tool (3399), reach behind a locking mechanism of backrest adjusting wheel - 5 -.

- Pry assembly tool (3399) outward - arrow B - and remove backrest adjusting wheel from seat.

- Press clamping pin - 6 - inward and remove securing clip - 7 -.

- Remove trim - 8 - in direction of travel out of mounts in seat frame.

- Remove trim - 9 - from seat frame.





Installation

- To install, perform the steps used for removal in reverse order.