Diagram 126/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Throttle Valve Control Module, Intake Flap Motor, Intake Manifold Runner Position Sensor, Low Fuel Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G186 - Throttle Drive (for Electronic Power Control (EPC) Locations

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC) Locations

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) Locations

G336 - Intake Manifold Runner Position Sensor Locations

G410 - Low Fuel Pressure Sensor Locations

J338 - Throttle Valve Control Module Locations

J519 - Vehicle Electrical System Control Module

J623 - Engine Control Module (ECM), in plenum chamber, center Control Modules in Front Part of Vehicle

T5l - 5-Pin Connector

T6x - 6-Pin Connector

T60 - 60-Pin Connector

V157 - Intake Flap Motor Locations

(220) - Sensor Ground Connection (in engine compartment wiring harness)

(D107) - Connection 5 (in engine compartment wiring harness)

Previous Diagram 126/8 (Tracks 85-98)

Next Diagram 126/10 (Tracks 113-126)