Sealing Flange Assembly Overview

Sealing Flange Assembly Overview





1 - 90 Nm + 1/4 turn (90°)
2 - Crankshaft toothed belt sprocket
3 - 15 Nm
4 - Seal
^ Do not additionally oil or grease sealing lip of oil seal

5 - Sealing flange on belt pulley side
^ Must be located on alignment pins
^ To remove and install, remove oil pan

6 - Cylinder block
7 - 60 Nm + 1/4 turn (90°)
^ Replace

8 - Flywheel/drive plate
9 - Intermediate plate
^ Must be located on dowel sleeves
^ Do not damage or bend when doing assembly work

10 - Sealing flange with seal
^ Only replaced as complete unit

11 - Diamond disc
^ Replace