Fluid - M/T: Service and Repair

Transmission oil, checking 02Q, 6 Speed M/T

Special tools, testers and auxiliary items required





^ Torque wrench V.A.G 1331





^ Triple square socket driver 3357

Transmission oil
- Remove noise insulation.





- Remove sealing plug for gear oil inspection - arrow -.

The oil level is correct when the transmission is filled up to lower edge of filler hole.

- Install bolt - arrow - with new sealing ring.
- Tighten bolt - arrow - to tightening torque.

When filling again, note the following:

- Remove bolt - arrow -.
- Top off oil to lower edge of filler hole.
- Install bolt - arrow - with new sealing ring.
- Tighten bolt - arrow - to tightening torque
- Install noise insulation.





Different versions of oil filler and oil drain plugs
I - Oil filler or drain plug with multi-point socket head, 45 Nm
II - Oil filler or drain plug with hex socket head, 30 Nm