Power Distribution Module: Description and Operation

Vehicle Electrical System Control Module

• Vehicle Electrical System Control Module (J519) and relay carrier at vehicle electrical system control module, at left instrument panel, are one component and cannot be separated.

• Additional information:

318Golf 2004

319Golf 2004 - Electrical System



=> Owner's Manual

Vehicle Electrical System Control Module (J519) performs the following tasks in the vehicle:

• Electric load management

• Exterior light control

• Turn signal control

• Wipers, rear window

• Heated rear window

• Interior light control

• Shift-/selector gate illumination

• Terminal control

• Dimming, instrument illumination

• Fuel Pump (FP) supply

• Pre-energizing of generator

• Horn

The following functions can be adapted:

• Erase learned values and set standard adaptation values

• Adjust Coming Home Time (equipment dependent)

• Adjust Leaving Home Time (equipment dependent)

• Set rear window heater "on time"

• Switch footwell lights on and off

• Switch highway signaling on and off

• Set load management

• Set headlamp cleaning system "on time"

• Adaptations listed above are dependent on vehicle equipment level and market version.

• "Highway signaling","comfort-flashing", or " tap signaling" means that turn signals are activated multiple times (1-5 times) when turn signal lever is tapped once (signal cycles).

• If Vehicle Electrical System Control Module (J519 ) is to be replaced, the work procedure to read out the codes stored in the module must always be performed. Refer to=> [ Vehicle Diagnosis, Testing and Information Systems ] Testing and Inspection.

DTC recognition and display:

Vehicle Electrical System Control Module (J519) is equipped with On Board Diagnostics (OBD) which assists in troubleshooting.

For troubleshooting, use Vehicle Diagnostic, Testing and Information System (VAS 5051A) in operating mode " Guided Fault Finding".