Trailing Arm Bonded Rubber Bushing

Front Wheel Drive

Trailing Arm Bonded Rubber Bushing

Special tools, testers and auxiliary items required

• Assembly Tool (T10230)

• Installation Device (3372)

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

Bonded rubber bushing, pressing out

- Remove trailing link. Refer to => [ Trailing Arm with Mounting Bracket ]. Trailing Arm With Mounting Bracket

- Install tools as shown in the illustration.





1. Tube (T10230/3)

2. Press piece (T10230/10)

3. Installation device (3372)

4. Thrust plate (VW 401)

5. Thrust plate (VW 402)

- Press out bonded rubber bushing.

Bonded rubber bushing, pressing in

- Place trailing link on a level surface.

- Mark a vertical line onto bushing of trailing link.

Dimension - A - = 114 mm.





There are 2 different bonded rubber bushings. For both, the marked line must lie between raised points - 1 - after pressing in.





- Install tools as shown in the illustration.





1. Tube (T10230/5)

2. Thrust plate (T10230/12), chamfer must point to bonded rubber bushing

3. Bonded rubber bushing

4. Installation device (3372)

5. Thrust plate (VW 402)

- Press in bonded rubber bushing flush.

- Install mounting bracket on trailing link.

- Install trailing link.