Sunroof with Glass Panel Assembly Overview
Sunroof with Glass Panel Assembly Overview
1 Glass Panel for Sunroof (One-Piece Safety Glass)
• Removing and installing, refer to => [ Sunroof with Glass Panel ] Sunroof with Glass Panel
• Adjusting, refer to => [ Sunroof Glass Panel, Adjusting Height ] Sunroof Glass Panel, Adjusting Height
2 Panel Seal
• Replace, refer to => [ Panel Seal ] Panel Seal
• Adjusting, refer to => [ Adjusting Panel Seal ] Adjusting Panel Seal
• Seal joint at center in rear area
3 Sun Shade
• Removing and installing, refer to => [ Sun Shade ] Sun Shade
4 Screw
• Screws are microencapsulated and must always be replaced after removing.
• Qty. 4
• 1.8 Nm
5 Spring Glider
• Bolted to sun shade
• Qty. 4
• Can be replaced separately
• Removing, refer to => [ Sun Shade ] Sun Shade
6 Bellow
• For covering slotted guide rail
• Removing and installing, refer to => [ Bellows ] Bellows
7 Water Channel/Upper Transverse Link
• Removing, refer to => [ Upper Transverse Link ] Upper Transverse Link
8 Guide Locking Hook
• Removed together with slotted rail, refer to => [ Slotted Guide Rail ] Slotted Guide Rail
9 Upper End Piece
• Clipped to lower part of end piece
• Removing, refer to => [ Upper Transverse Link ] Upper Transverse Link
10 Lower End Piece
• Can be replaced separately
• Use butyl adhesive sealing cord (AKL 450 005 05) for sealing
11 Assembly Unit
• Removing and installing, refer to => [ Installation Unit ] Installation Unit
• As necessary, lubricate guide channels exclusively (G 000 450 02), otherwise function is not guaranteed.
12 Screw
• Screws are microencapsulated and must always be replaced after removing.
• Qty. 3
• 3.5 Nm
13 Hex Key Wrench
• For Emergency Operation
• Hex wrench is stored in vehicle tool kit.
14 Electrical Drive Motor
• Removing and installing, refer to => [ Sunroof Glass Panel Drive Motor ] Sunroof Glass Panel Drive Motor
• Adjusting drive motor (zero position), refer to => [ Sunroof Glass Panel Drive Motor, Adjusting Neutral Position ] Sunroof Glass Panel Drive Motor, Adjusting Neutral Position
15 Spring
• Qty. 2
• To open wind deflector
• Clipped in on wind deflector and cannot be replaced individually
• Removing => [ Wind Deflector ] Wind Deflector
16 Wind Deflector
• Removing and installing, refer to => [ Wind Deflector ] Wind Deflector
17 Wind Deflector Bearing
• Qty. 2
• Clipped in on wind deflector and cannot be replaced individually
• Removing, refer to => [ Wind Deflector ] Wind Deflector
18 Front Guide
• Can be slid individually out of guide rail
• Removing, refer to => [ Slotted Guide Rail ] Slotted Guide Rail
19 Lower Rear Guide Part
• Removed together with slotted rail, refer to => [ Slotted Guide Rail ] Slotted Guide Rail
20 Torx(R) Screw
• 3 per side
• 5 Nm
21 Slotted Guide Rail
• Removing and installing, refer to => [ Slotted Guide Rail ] Slotted Guide Rail
22 Spacer
• Removing and installing, refer to => [ Slotted Guide Rail ] Slotted Guide Rail