Low Beam Bulb

Low Beam Bulb

• The following illustrations show replacing a bulb in a left headlamp.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Remove the cap - 1 - in - direction of arrow -.






- Turn the bulb socket and left low beam headlamp bulb (M29) - 1 - in - direction of arrow - and remove the headlamp.






- Remove the left low beam headlamp bulb - 2 - from the bulb socket - 1 - in - direction of arrow -.






Bulb: H7 12 V/55 W

Installation


• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• When installing cap, ensure proper seating. It is destroyed by entry of water into headlamp.

- Install the left low beam headlamp bulb (M29) - 1 - into the bulb socket so that the pin on the left low beam headlamp bulb fits into the recess - arrow - on the bulb socket - 2 -.






- Insert the bulb socket and left low beam headlamp bulb - 1 - into the headlamp and then turn the left low beam headlamp bulb in - direction of arrow -.






- Insert the cap - 1 - into the opening in the headlamp and turn it in - direction of arrow -.






- Check headlamp for functions.

- Check and adjust the headlamp adjustment.