Turbocharger and Coolant Return Line Assembly Overview

Turbocharger and Coolant Return Line Assembly Overview





1 Gasket

• Always replace.

2 Nut, 20 Nm

• Always replace.

• Coat the stud bolts on the cylinder head with hot bolt paste (G 052 112 A3).

3 Banjo Bolt, 35 Nm

4 Seal

• Always replace.

5 Bolt, 9 Nm

6 Bolt, 23 Nm

• Only installed with the coolant return line with two brackets.

7 Coolant Return Line

• Phased-in introduction of coolant return lines with one bracket.

8 Turbocharger

• Can only be replaced with the exhaust manifold.

• Removing and installing, refer to => [ Turbocharger ] Turbocharger.

9 Bracket

10 Bolt, 30 Nm

• Coat the bolt with hot bolt paste (G 052 112 A3).

11 Bolt, 30 Nm

• Coat the bolt with hot bolt paste (G 052 112 A3).

12 Bracket

13 Bolt, 23 Nm

14 Nut, 30 Nm

• Do not loosen to remove the turbocharger.

• Always replace.

• Coat the stud bolts on the exhaust manifold with hot bolt paste (G 052 112 A3).

15 Fastening Strip