Alarm Horn: Service and Repair

Anti-Theft Alarm System and Interior Monitoring

Alarm Horn

The Alarm Horn (H12) is located inside the plenum chamber on the right side.

• the anti-theft alarm system must be turned off in order to remove the Alarm Horn (H12).

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

Removing

- Remove the plenum chamber cover.

- Disconnect the connector - 1 - on the Alarm Horn (H12) - 3 -.





- Remove the screw - 2 - and remove the Alarm Horn (H12) - 3 -.

Installing

Install in reverse order of removal, noting the following:

- Tighten the screw to 9 Nm.