One Piece Backrest

Rear Seats

One Piece Backrest

Removal

- Remove bolts - 1 - from retaining support - 2 - on center support - 3 - on back of backrest.





- Push seatbench forward. Refer to => [ One Piece Seatbench ]. One Piece Seatbench

- Fold backrest down.

- Press back lugs - 1 - on left and right using a screwdriver and remove backrest - 2 - upward from backrest mount - 3 -.





Installation

- Install backrest - 2 - into backrest mounting - 3 - and press downward. (Catches - 1 - will lock when doing this.)





- Install retaining support - 2 - onto center mounting - 3 -.





- Install bolts - 1 - on back of backrest. Tightening specification: 20 Nm