Trunk Lamp: Service and Repair

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Luggage Compartment Lamp

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Insert the (VAS 3409) or a small screwdriver behind the lens and carefully pry out the Luggage Compartment Lamp (W3).





- Remove the Luggage Compartment Lamp (W3).

- Disconnect the connector on the Luggage Compartment Lamp (W3).

Bulb 12 V/5 W

Installing

Install in reverse order of removal, noting the following:

After working on the Luggage Compartment Lamp ( W3), test the switch functionality. The Luggage Compartment Lamp (W3) must not come on when the rear lid is closed.