Loading Edge Cover

Luggage Compartment Trim

Loading Edge Cover

Removal

- Loosen storage area floor cover from trim (two twist locks).

- Press the pins of expanding clip - 4 - through the clip and remove the expanding clip.

- Remove lock carrier cover - 1 - in the area of spring clips - 2 -.

- Carefully unhook hooks on outer edges of trim.

- Remove lock carrier cover - 1 - from the lock carrier in an upward direction.

Installation

Installation is the reverse of removal.

• Prior to installation, check clips - 5 - and replace if necessary.

• After assembling trim, make sure seal is properly fitted.