Seatbench Cover and Cushion, Convertible

Rear Cover and Cushion

Seatbench Cover and Cushion, Convertible

Removal





- Remove the rear bench seat. Refer to => [ Seatbench, Convertible ] Rear Seats.

- Detach the piping -=> [ (Item 1) Molding ] Rear Cover and Cushion (Overviews)- of the cover -=> [ (Item 2) Cover ] Rear Cover and Cushion (Overviews)- from the wire frame-=> [ (Item 4) Wire Frame ] Rear Cover and Cushion (Overviews)-.

- Detach the upholstery wire -=> [ (Item 3) Cushion Wire ] Rear Cover and Cushion (Overviews)- from the retaining wire -=> [ (Item 6) Retaining Wire ] Rear Cover and Cushion (Overviews)- in the cushion -=> [ (Item 5) Cushion ] Rear Cover and Cushion (Overviews)- and remove the cover -=> [ (Item 2) Cover ] Rear Cover and Cushion (Overviews)-.

Installation

To install, perform the steps used in removal in reverse order.