Courtesy Lamp: Service and Repair

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Front Interior Lamp

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Pry the lens off the Front Interior Lamp (W1) using the (VAS 3409) or a small screwdriver.





- Disconnect the connectors on the Front Interior Lamp (W1).

Bulb 12 V/5 W

Installing

Install in reverse order of removal, noting the following:

- Make sure the Front Interior Lamp (W1) is working correctly.