Mirror Adjusting Switch and Mirror Selector Switch

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Mirror Adjusting Switch and Mirror Selector Switch

The Mirror Adjustment Switch (E43) and the Mirror Selector Switch (E48) are a single unit and cannot be replaced separately.

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Remove door trim panel.

- Disconnect the connector on the mirror switch.

- Bend the frame outward on the long side of the switch and remove the switch.





Installing

Install in reverse order of removal.