09G, 6 Speed A/T

Electrical/Electronic Components and Component Locations, 09G, 6 Speed A/T





1. Transmission Control Module (TCM) J217
2. Engine Control Module (ECM)
3. Multi-Function Transmission Range (TR) Switch F125
4. Valve body
5. Wiring harness, 8-pin
6. Transmission Fluid Temperature Sensor G93
7. Wiring harness, 14-pin
8. Automatic Transmission Hydraulic Pressure Sensor 1 G193
9. Automatic Transmission Hydraulic Pressure Sensor 2 G194
10. Transmission Input Speed (RPM) Sensor G182
11. Transmission Output Speed (RPM) Sensor G195
12. Shift Lock Solenoid N110
13. Tiptronic Switch F189
14. Starting Interlock Relay J207
15. Data Link Connector (DLC)
16. Transmission Range (TR) Display Y6
17. ABS Control Module J104





Multi-Function Transmission Range (TR) Switch F125
Component location: Multi-function switch is located at left, front of transmission, removing Multi-Function Transmission Range (TR) Switch F125, removing, installing and adjusting.





Valve body
Component location: Valve body is bolted on to transmission housing below and covered by transmission oil pan.

Solenoid Valve 1 N88 and Solenoid Valve 2 N89 as well as Automatic Transmission Pressure Regulating Valve 5 N233, Solenoid Valve 4 N91, Solenoid Valve 5 N92, Solenoid Valve 6 N93, Automatic Transmission Pressure Regulating Valve 4 N218 and Automatic Transmission Pressure Regulating Valve 6 N371 are secured to the valve body.





Wiring harness, 8-pin
^ With integrated Transmission Fluid Temperature Sensor G93 - arrow -
^ Sensor wiring harness

Component location: Wiring harness is secured to valve body and transmission.





Wiring harness, 14-pin
^ Solenoid valves wiring harness

Component location: Wiring harness is secured to valve body and transmission.

Only vehicles up to 06.04





Automatic Transmission Hydraulic Pressure Sensor 1 G193 and Automatic Transmission Hydraulic Pressure Sensor 2 G194
Component location: Sensors are located in valve body.

1. Automatic Transmission Hydraulic Pressure Sensor 1 G193
2. Automatic Transmission Hydraulic Pressure Sensor 2 G194

Continued for all vehicles





Transmission Input Speed (RPM) Sensor G182 and Transmission Output Speed (RPM) Sensor G195
Component location: Sensors are installed above valve body in transmission housing.

1. Transmission Input Speed (RPM) Sensor G182
2. Transmission Output Speed (RPM) Sensor G195





Shift Lock Solenoid N110
Component location: Shift Lock Solenoid is located in the shift mechanism - arrow -.





Tiptronic Switch F189
Component location: Tiptronic Switch F189 is integrated into circuit board, which is located in shift mechanism cover.

It consists of hall sensors, which are activated by a magnet - arrow - on transverse slide of cover strip - 2 -.

If there are malfunctions, it must first be checked whether the magnet - arrow - on transverse slide of cover strip - 2 - is secured correctly, replace cover strips if necessary. Selector mechanism cover with integrated circuit board must only be replaced after checking the wires.

In vehicles with multi-function steering wheel, buttons on steering wheel and their wire connections must also be checked.





Data Link Connector (DLC)
Component location: Data Link Connector (DLC) - arrow - is located on left side under driver-side storage compartment.





Transmission Range (TR) Display Y6 for vehicles up to model year 2005
Component location: In instrument cluster





Transmission Range (TR) Display Y6 for vehicles as of model year 2006
Component location: In instrument cluster in lower area of display - arrow -





Transmission Control Module (TCM) J217
Control module - arrow - is located beneath inner plenum chamber cover.