Windshield Wiper System, Assembly

Windshield Wiper System, Assembly







CAUTION:
Before beginning repairs on the electrical system:
- Obtain the Anti-Theft radio security code.
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.
- Disconnect negative (-) battery terminal.
- When Disconnecting and Connecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks as specified.







1 - Wiper blade
- Adjusting rest position
2 - Wiper rubber
3 - Connecting lever
4 - Connecting rod
5 - Crank
6 - Wiper motor
7 - Hex nut M8
- 20 Nm (15 ft.lb)
8 - Wiper frame
9 - Securing bolts M6 5 Nm (44 in.lb)
10 - Protective sleeve
11 - Cover cap
12 - Hex nut M8
- 20 Nm (15 ft.lb)
13 - Wiper arm
14 - Retaining clip