Low Beam Bulb, From 07.2005

Halogen Headlamp

Low Beam Bulb, From 07.2005

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the ignition key.

Removing

- Remove headlamp

- Remove the cap on the back of the headlamp.

- Disconnect the connector - 3 - from the low beam bulb.





- Release the spring clip - 1 -.

- Remove the bulb - 2 - from reflector.

Installing

CAUTION!
• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• When installing cap, ensure proper seating. It is destroyed by ingress of water into headlamp.

Install in reverse order of removal, observing the following:

- Install the new bulb so that retaining tabs on the lamella disc lie in cut-outs in reflector.

- Check headlamp for function.

- Check headlamp adjustment and adjust the headlamps.