Battery Transmitter and Receiver Unit, Fuse and Wiring Harness, Overview

Battery, Transmitter/receiver Unit, Fuse And Wiring Harness, Overview







1 - Positive connection
- red wire with suitable connection
2 - to terminal 15a
- connection to terminal 15a:
- Ensure wire is protected by fuse
Fuse max. 15A
3 - Antenna Ground (GND)
- ensure correct Ground (GND) connection to body
- Antenna location must be treated with suitable corrosion protection
4 - Transmitting/Receiving Antenna
- Component locations:
5 - Shielded antenna wire
- Wire with coaxial connector
6 - Telephone or two-way radio transmitter/receiver unit
- Telephone may not be installed
7 - Wiring harness
- Voltage supply positive via read wire, 2.5 sq.mm cross section
- Voltage supply negative via brown wire, 2.5 sq.mm cross section
- If necessary, wire to terminal 15a via black wire 1.5 sq.mm cross section
8 - Fuse holder
- Install next to battery
9 - To starter
10 - Battery
- Location in luggage compartment left and right behind side panels.
11 - Negative wire
12 - Body Ground (GND)