Radio-Navigation System
Radio-Navigation System
Radio navigation system with Multi-Function Display 2 with DVD drive
• Replacement part number for radio navigation system is located on a sticker on the radio navigation system housing.
• If radio navigation system is replaced, always activate anti-theft coding, => [ Radio-Navigation System, Electronic Anti-Theft System ] Radio-Navigation System, Electronic Anti-Theft System. Give the new code number to the customer.
• If the anti-theft code is not known, you can retrieve it via the known systems. You need the identification number of the radio navigation system for retrieval. It is on a sticker attached to the side of the radio unit. The identification number is also stamped in the material in the side of the radio navigation system.
• If a radio navigation system from one vehicle is to be installed in another vehicle, then always make sure that radio navigation systems of both vehicles have the same replacement part number. Otherwise navigation system will malfunction since the setting of the rotation angle sensor in radio navigation system does not match the vehicle.
• Before troubleshooting or servicing, the technicians must be familiar with the function and operation of the radio navigation system.
• Additional information, => Owner's Manual 199Radio Navigation System.
• Anti-theft coding is equipped with protection code number, deactivating electronic anti-theft system, => [ Radio-Navigation System, Electronic Anti-Theft System ] Radio-Navigation System, Electronic Anti-Theft System.
• When performing service work or fault-finding, use => Vehicle Diagnosis, Testing and Information System (VAS 5051) or Vehicle Diagnosis and Service System (VAS 5052) in the function "Guided Fault Finding",.
• For proper function of the navigation system, rotation angle sensor in unit must be set corresponding to installation position of unit in the vehicle. Therefore, always note the replacement part number when replacing the unit. An incorrect installation causes malfunctions in the navigation system.
• When the battery is reconnected, check any affected system or component (radio, clock, comfort electrical connection etc.) according to the repair information and/or the operating instructions.
• By the use of magnetically adhered antennae on vehicle roof, there is the hazard that the compass module will malfunction due to magnetic influence and remaining magnetization of the vehicle roof. For complaints of inaccurate or faulty direction displays on the compass module, ask the customer whether a magnetically adhered antenna is being used before starting repair work.
The "RNS MFD 2 DVD" radio navigation system unifies the functions of a navigation system with those of a high-value RDS vehicle radio.
In double DIN housing of radio navigation system are
• a RDS radio receiver part
• a 6.5 inch color liquid crystal display in 16:9 format
• a navigation system with GPS satellite receiver and
• a DVD drive for the navigation system
installed.
The "RNS MFD 2 DVD" is available as a version which operates the speakers via 4 unit-internal speaker outputs or as a version with an additional sound system amplifier. The speakers are then connected directly to the sound system amplifier and the radio navigation system speaker outputs are used for the amplifier input.
• Playback of audio CDs is only possible with a separate CD-changer.
• In conjunction with a "RNS MFD 2 DVD" a CD-changer is also always installed in the glove compartment.
For expanded functions, there are connection options for a CD changer, TV tuner, digital satellite radio tuner, telephone systems and amplifier.
In the sedan, antennae for radio/navigation system installed are a window antenna and are located in the rear windshield. The antenna system version has the "diversity function".
For the wagon, the radio reception antenna installed is a window antenna and is located in the rear side windows. The antenna system version has the " diversity function".
For wagon, a roof antenna is installed for navigation.