Hood Locking and Unlocking Components Assembly Overview

Hood

Hood Locking and Unlocking Components Assembly Overview





1 Catch

• Removing:

- Remove bolts - 2 - and remove catch.

• Adjusting:

- Catch can be adjusted toward the left or right in longitudinal holes.

2 Bolt

• Quantity: 3

• Tightening specification: 10 Nm

3 Expanding Nut

• Quantity: 2

4 Mounting Bracket

5 Release

• Clipped into mounting bracket.

6 Bolt

• Quantity: 2

• Tightening specification: 1.5 Nm

7 Actuating Lever

• Removing and Installing, refer to => [ Operating Lever ] Hood

8 Release

• Clipped in on wheel housing and lock carrier.

9 Release Coupling

• Disconnecting, refer to => [ Hood Release, Disconnecting ] Hood Release, Disconnecting

10 Hood Lock

• Removing and Installing, refer to => [ Hood Lock ] Hood

• Adjusting, refer to => [ Hood, Adjusting ] Hood, Adjusting