Hinge Gasket

Rear Lid

Hinge Gasket

Removing





- Remove the left luggage compartment trim panel

- Pull off gasket - 2 - from sealing channel and from valve.

- Open locking mechanism in gasket and pull off gasket from hinge - 1 -.

- Disengage hose - 3 - from mount in side panel and from grommet - 4 -.

- Pull valve - 5 - with hose - 3 - out of sealing channel.

Installation





- Insert hose - 3 - through opening in sealing channel.

- Slide gasket - 2 - over hinge - 1 - and press gasket together until it engages audibly.

• When closing rear lid, the sealing lip on hinge gasket must not be pulled in from hinge pipe. Hinge must be adjusted so that hinge pipe does not grind on the sealing lip.

- Press valve - 5 - into sealing channel.

- Press gasket - 2 - into sealing channel and into valve - 5 -.

• Make sure that gasket - 2 - and clips in valve - 5 - are properly seated.

- Slide hose - 3 - into grommet - 4 -.