Center Storage Compartment Unit

Storage Compartments, Covers and Trim

Center Storage Compartment Unit

Removal

- Switch off ignition.

- Remove the glove compartment. Refer to => [ Glove Compartment ] Glove Compartment

- Remove instrument panel center trim. Refer to => [ Center Instrument Panel Trim ] Center Instrument Panel Trim

- Remove instrument cluster trim. Refer to => [ Instrument Cluster Trim ] Instrument Cluster Trim

- Remove passenger side instrument panel trim. Refer to => [ Passenger Side Instrument Panel Trim ] Passenger Side Instrument Panel Trim

• To provide a better overview, the adjacent components are only partially shown in the illustration.

- Remove the two bolts - 1 - (1.5 Nm).

- Remove center storage compartment unit - 2 - from instrument panel.

- Disconnect wiring harness from warning light switch.





Installation

- To install, perform the steps used for removal in reverse order.