Roof Rail Overview

Roof Rail

=> [ Roof Rail Assembly Overview ]

=> [ Roof Rail Angle Bracket Assembly overview ]

Roof Rail Assembly Overview





1 Roof Rail

• Removing and installing, refer to => [ Roof Rail ] Roof Rail

2 Roof

3 Hex Nut

• 3 pieces per side

• 23 Nm

4 Upper Tolerance Compensation

• Consists of upper and lower conical washers.

5 Rear Angle Bracket

• Removing and Installing, refer to => [ Roof rail Angle Bracket ] Roof Rail

• Various angle brackets are installed and they must not be interchanged.

6 Lower Tolerance Compensation

• Consists of upper and lower washers as well as bracket.

7 Bolt

• Quantity: 2 per bracket

• 20 Nm

8 Center Angle Bracket

• Removing and Installing, refer to => [ Roof rail Angle Bracket ] Roof Rail

• Various angle brackets are installed and they must not be interchanged.

9 Front Angle Bracket

• Removing and Installing, refer to => [ Roof rail Angle Bracket ] Roof Rail

• Various angle brackets are installed and they must not be interchanged.

Roof Rail Angle Bracket Assembly overview

• The illustration shows the middle bracket, the front and rear brackets are treated in the same way.

• The brackets must not be interchanged.

• The various conical washers must not be interchanged.





1 Angle Bracket

• There are different angle brackets for front, center and rear.

• Angle bracket, removing and installing, refer to => [ Roof rail Angle Bracket ] Roof Rail

• New angle bracket, installing, refer to => [ New Roof Rail Angle Bracket ] Roof Rail

2 Bolt

• Quantity: 2 per angle bracket

• 20 Nm

3 Upper Conical Washer

• In lower tolerance compensation

4 Lower Conical Washer

• In lower tolerance compensation

5 Bracket for Lower Tolerance Compensation

6 Hex Nut

• 23 Nm

• For securing roof rail.

7 Lower Conical Washer

• In upper tolerance compensation

8 Upper Conical Washer

• In upper tolerance compensation

9 Seal

10 Roof Rail