Sunroof Glass Panel Drive, Adjusting Zero Position

Sliding/Tilting Sunroof with Glass Panel, Meritor

Sunroof Glass Panel Drive, Adjusting Zero Position

Adjustment of zero position may be necessary if the drive motor was removed while not in zero position or the glass panel of sunroof was closed or opened via emergency operation.

The drive motor is removed but the electrical wires are connected.

- Move control knob to "roof opened" position.

- Move automatic control knob to "roof closed" position.

- Move automatic rotary switch to "roof tilted" position.

- Move automatic control knob to "roof closed" position.

- Install drive motor in this position (zero position) with sunroof glass panel closed.

• Drive motor for glass panel of sunroof is in zero position when a white dot can be seen in the opening - arrow - of drive motor.