Sliding/Tilting Sunroof With Glass Panel, Meritor (Overview)

Sliding/Tilting Sunroof with Glass Panel, Meritor

Operating without Electricity

• If there is a malfunction in the electrical system, the sunroof and glass panel motor can be moved using a hex wrench. Hex wrench is located in headliner, at right next to opening for rear interior/reading light.

- Disengage retaining hooks - 2 - using (3409).





- Fold down cover - 1 - - arrow a -.

- Pull cover downward - arrow b - out of retainer.

- Guide hex wrench - 1 - through opening into bolt - 2 - of drive motor - 3 -.





- Push wrench - 1 - upward to release the drive motor.

The screw - 2 - can be pushed in a few millimeters - a -. The sunroof glass panel can be moved only in this position.

Water Drain Hoses, Cleaning

• For cleaning, an assisting tool is recommended, such as a speedometer driveshaft inner cable, approximately. 2300 mm (90.5 in.) long.