Seat Bench Cover and Upholstery

Rear Seat Cover and Upholstery

Seat Bench Cover and Upholstery

• The "Sportline" version is represented in the following description. The procedure is similar for other equipment versions.

Removal

- Remove the bench seat. Refer to => [ Seat Bench ] Rear Seats

- Cut through all upholstery clips - arrows - all around bottom side of bench seat with suitable pliers.

- Loosen cover - 1 - at outer sides from upholstery - 2 - and roll up the sides.





- Cut through all upholstery hooks - arrows - with a diagonal cutter.

- Remove the cover - 1 - from the padding - 2 -.





Installation

• When securing cover - 1 - to upholstery - 2 - using (V.A.G 1634).

- To install, perform the steps used for removal in reverse order.