Power Seat Height Adjustment Unit

Front Seats

Power Seat Height Adjustment Unit

Removal

- Mount the (VAS 6136) on the (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the (VAS 6136).

- Remove the front seat belt latch. Refer to => [ Front Seat Belt Latches ] Service and Repair

- Remove seat cap. Refer to => [ Cover Cap ] Cover Cap

- Remove electric seat front end trim. Refer to => [ Power Seat Front Side Trim ] Power Seat Front Side Trim

- Remove electric seat trim. Refer to => [ Power Seat Trim ] Power Seat Trim

- Remove electric seat trim bracket. Refer to => [ Power Seat Trim Bracket ] Power Seat Trim Bracket

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Remove cover and upholstery from front seat backrests. Refer to => [ Front Seat Cushion ] Front Seat Cover and Upholstery

- Remove screw - 1 - in rear area of seat base.

• Screw - 1 - in installation position points from inside toward outside.

- Disconnect wiring harness - 2 - from height adjuster - 3 -.

- Remove the two bolts - 4 -.

- Remove height adjuster - 3 - from mounts in seat base.





Installation

- To install, perform the steps used for removal in reverse order.