Power Seat Pan

Front Seats

Power Seat Pan

Removal

- Mount the (VAS 6136) on the (VAS 6095).

- Remove front seat => [ Front Seat ] Front Seat

- Attach the seat to the (VAS 6136).

- Remove the front seat belt latch. Refer to => [ Front Seat Belt Latches ] Service and Repair

- Remove seat cap. Refer to => [ Cover Cap ] Cover Cap

- Remove electric seat front end trim. Refer to => [ Power Seat Front Side Trim ] Power Seat Front Side Trim

- Remove electric seat trim. Refer to => [ Power Seat Trim ] Power Seat Trim

- Remove electric seat trim bracket. Refer to => [ Power Seat Trim Bracket ] Power Seat Trim Bracket

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Remove cover and upholstery from front seat backrests. Refer to => [ Front Seat Cushion ] Front Seat Cover and Upholstery

- Remove screws - 1 - and - 2 - on right side.

- Remove screw - 3 - in rear area.

• Screw - 3 - in installation position points from inside toward outside.

- Remove screw - 4 - in front area.

- Remove seat pan - 5 - from longitudinal adjuster - 6 -.





Installation

- To install, perform the steps used for removal in reverse order.

If the present seat pan is replaced, new part is a "Sportline " seat pan. If this seat pan in installed in a vehicle with a different equipment type, bracket - 1 - and - 2 - must be removed.

To avoid contamination, seat tracks - 3 - and - 4 - must be covered with a cloth when removing brackets - 1 - and - 2 -.