Long Version

Noise Insulation Assembly Overview, Long Version

Slight changes may have to be made to removal and installation procedures, depending upon engine installed in vehicle.

The screws -3- are micro-encapsulated and must be replaced after loosening.






1 Noise Insulation
Arrow - points in direction of travel.
Removing:
Remove the screws -2- and -3-.
Pull the noise insulation toward the rear out of the lock carrier mounts.

2 Bolt
Quantity: 9
Tightening specification: 2 Nm

3 Bolt
The screws are micro-encapsulated.
Always replace bolts after loosening.
Quantity: 3
Tightening specification: 6 Nm