Diagram 81/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Secondary Air Injection (AIR) Pump Relay, SB-Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J299 - Secondary air injection pump relay

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

J623 - Engine Control Module (ECM) Control Modules in Engine Compartment

SB14 - Fuse 14 (on fuse panel B)

SB15 - Fuse 15 (on fuse panel B)

SB16 - Fuse 16 (on fuse panel B)

SB28 - Fuse 28 (on fuse panel B)

T2bu - Double connector

T20e - 20-pin connector

T40 - 40-Pin Connector, under electronics box, in engine compartment

T81 - 81-pin connector

V101 - Secondary air injection pump motor

Z - Oxygen Sensor (O2S) Heater

Z19 - Oxygen sensor heater Locations

(B351) - Positive connection 2 (87a) (in main wiring harness)

(B358) - Positive connection 9 (87a) (in main wiring harness)

(B558) - Positive connection 22 (30a) (in main wiring harness)

* - Only models with engine code BLY

** - Only models with engine codes BSE, BSF

Previous Diagram 81/7 (Tracks 71-84)

Next Diagram 81/9 (Tracks 99-112)