Diagram 109/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


SB-Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

N75 - Wastegate bypass regulator valve Locations

N80 - EVAP canister purge regulator valve 1 Locations

N249 - Turbocharger recirculation valve

N276 - Fuel pressure regulator valve Locations

SB32 - Fuse 32 (on fuse panel B)

SB33 - Fuse 33 (on fuse panel B)

SB44 - Fuse 44 (on fuse panel B)

SB45 - Fuse 45 (on fuse panel B)

SB46 - Fuse 46 (on fuse panel B)

T2gz - Double connector

T2hb - Double connector

T2hc - Double connector

T2gx - Double connector

T3af - 3-pin connector

T4n - 4-pin connector

T6u - 6-pin connector

T14a - 14-Pin Connector, black, connector station 1 in engine compartment, left

T26a - 26-Pin Connector, on electronics box

T40 - 40-Pin Connector, under electronics box, in engine compartment

V144 - Leak detection pump EVAP System

Z19 - Oxygen sensor heater Locations

Z29 - Heater for oxygen sensor 1 after catalytic converter Locations

(D180) - Connection (87a) (in engine compartment wiring harness)

* - Applicable from November 2006

** - Only models with engine code BPY

Previous Diagram 109/6 (Tracks 57-70)

Next Diagram 109/8 (Tracks 85-98)