Diagram 100/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster, Indicator Lamps, Oil Pressure Switch, Oil Level Thermal Sensor, Tachometer, Speedometer





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch Locations

G5 - Tachometer

G21 - Speedometer

G266 - Oil Level Thermal Sensor Locations

J285 - Instrument Cluster Control Module Control Modules in Interior

J519 - Vehicle Electrical System Control Module Control Modules in Interior

K - Instrument Cluster Control Modules in Interior

K2 - Generator (GEN) Warning Lamp

K3 - Oil Pressure Warning Lamp

K38 - Oil Level Indicator Lamp

K132 - Electronic Power Control (EPC) Warning Lamp

T1ac - Single Connector

T3bu - 3-Pin Connector

T6e - 6-Pin Connector, black, connector station, electronic steering, in engine compartment

T14a - 14-Pin Connector, black, connector station 1 in engine compartment, left

T36 - 36-Pin Connector

(367) - Ground Connection 2 (in main wiring harness)

(371) - Ground Connection 6 (in main wiring harness)

(671) - Ground Connection 1 (on left front long member) Overview of Ground Connections in Engine Compartment

(672) - Ground Connection 2 (on left front long member) Overview of Ground Connections in Engine Compartment

(B281) - Plus Connection 5 (15a) (in main wiring harness)

* - Applicable from November 2006

** - Applicable through October 2006

Previous Diagram 100/18 (Tracks 225-238)