Diagram 18/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Front Passenger's Safety Belt Switch, Seat Occupied Recognition Control Module, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E25 - Front Passenger's Safety Belt Switch

G452 - Seat Occupied Recognition Pressure Sensor Passive Occupant Detection System

G453 - Seat Occupied Recognition Safety Belt Force Sensor Locations

J234 - Airbag Control Module Control Modules in Interior

J285 - Instrument Cluster Control Module Control Modules in Interior

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

J706 - Seat Occupied Recognition Control Module, below driver's seat Control Modules in Interior

T2h - Double Connector, yellow, connector station driver's side, below seat

T2fu - Double Connector, in front passenger's seat

T3bw - 3-Pin Connector, in front passenger's seat

T3bx - 3-Pin Connector, in front passenger's seat

T10b - 10-Pin Connector, black, connector station front passenger's side, below seat

T18f - 18-Pin Connector

T20e - 20-Pin Connector

T36 - 36-Pin Connector

T75 - 75-Pin Connector

(294) - Ground Connection 9 (in passenger compartment wiring harness)

(B384) - Powertrain CAN-Bus High Connection 2 (in main wiring harness)

(B391) - Powertrain CAN-Bus Low Connection 2 (in main wiring harness)

* - Applicable from May 2005

** - Only applicable to US/CDN, not for Mexico

Previous Diagram 18/7 (Tracks 71-84)