Diagram 116/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Seat Heating Element, Driver's Backrest Heating Element, Side Bolster Heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G59 - Driver's Heated Seat Temperature Sensor Locations

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J774 - Front Heated Seats Control Module Control Modules in Interior

T2cj - Double Connector

T3cq - 3-Pin Connector

T3cr - 3-Pin Connector

T4bv - 4-Pin Connector, black, below driver's seat

T8ac - 8-Pin Connector

T10c - 10-Pin Connector, black, connector station driver side, below seat

Z6 - Driver's Seat Heating Element Locations

Z7 - Driver's Backrest Heating Element Locations

Z76 - Driver's Seat - Left Side Bolster Heater Locations

Z77 - Driver's Seat - Right Side Bolster Heater Locations

(77) - Ground Connection (on left lower B-pillar) Overview of Ground Connections in Interior

(145) - Ground Connection 3 (in heated seats wiring harness)

(684) - Ground Connection (on left front side member) Overview of Ground Connections in Interior

(M41) - Connection 1 (in driver's seat wiring harness)

(M42) - Connection 2 (in driver's seat wiring harness)

(O15) - Connection 4 (in seat heater wiring harness)

* - Where applicable

** - Applicable through April 2005

*** - Applicable from May 2005

Next Diagram 116/3 (Tracks 15-28)