Diagram 13/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Backrest Adjustment Switch, Lumbar Support Height Adjustment Button, Lumbar Support Fore/Aft Adjustment Button





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E96 - Driver backrest adjustment switch Locations

E335 - Lumbar support height adjustment button

E336 - Lumbar support forward/back adjustment button

S44 - Driver power seat adjustment circuit breaker 1

SC36 - Fuse 36 (on fuse panel C)

T6cr - 6-Pin Connector, black, in seat

T8ad - 8-pin connector

T10c - 10-Pin Connector, black, connector station driver side, below seat

V45 - Driver backrest adjustment motor

V125 - Driver seat lumbar support curvature adjustment motor Locations

V129 - Driver seat lumbar support height adjustment motor Locations

(77) - Ground Connection (on left lower B-pillar) Overview of Ground Connections in Interior

(684) - Ground connection on left front side member Overview of Ground Connections in Interior

* - 1.5 diameter possible

** - Applicable through April 2008

*** - Applicable from May 2008

Next Diagram 13/3 (Tracks 15-28)