Blower Motor Resistor: Service and Repair

Fresh Air Blower Series Resistor with Fuse

Removing

CAUTION!
Contact with a hot exhaust system can cause severe burns.

Fresh Air Blower Series Resistor With Fuse (N24) may be hot.

Let Fresh Air Blower Series Resistor With Fuse (N24) cool off before removing.

Perform following work first:

- Remove partition from heating unit. Refer to => [ Heating and A/C Unit Partition ] Heating and A/C Unit Partition.





- Disconnect harness connector - 1 - from Fresh Air Blower Series Resistor With Fuse (N24).

- Press locking mechanism in - direction of arrow - and remove Fresh Air Blower Series Resistor With Fuse (N24) from heating unit.

Installing

Install in reverse order of removal.