Fresh Air Blower and Fresh Air Blower Control Module (Climatronic System)

Fresh Air Blower and Fresh Air Blower Control Module

• The fresh air blower (V2) and fresh air blower control module (J126) are accessible from the passenger footwell.

• The fresh air blower control module (J126) and the fresh air blower (V2) are in a single housing together and cannot be replaced individually.

- Remove partition from heating unit. Refer to => [ Heating and A/C Unit Partition ] Heating and A/C Unit Partition.

- Remove glove compartment.

- Disconnect the connector on the fresh air blower (V2) and on the fresh air blower control module (J126) - 1 -.





- Disengage locking mechanism - 2 - and then turn and remove the fresh air blower (V2) and the fresh air blower control module (J126) - in the direction of arrow -.