Clock: Service and Repair

03 - Service Procedures


Clock and Date, Setting

Set clock with buttons below tachometer

Adjustment buttons are located at left under tachometer.





- Press the left button - 1 - to set the hour. Press button only briefly to advance by one hour.

- Press the right button - 2 - to set the minutes. Press button only briefly to advance by one minute.

Set hour and date with buttons on windshield wiper lever





- Switch ignition on.

- Press button - 2 - for 2 seconds to go to main menu.

- Select "Settings" menu with button - 2 - and confirm with button - 1 -.

- Select "Clock" menu with button - 2 - and confirm with button - 1 -.

- Now mark menu time "Hours" by pressing button - 1 -, set correct hour with button - 2 - and then confirm with button - 1 -.

- Do the same with menu item "Minutes".

- You can leave the "Settings" menu using menu item " back".

- Now select "MFD" as actual display and confirm with button - 1 -.

- Switch ignition off.

Set hour and date with buttons on multi-function steering wheel





- Switch ignition on.

- Press button - 1 - until "Settings" menu appears.

- Then select menu item "Clock" with buttons - 2 - and - 4 -.

- Confirm selection with button - 3 -.

- If "Hour" is marked, marked menu item is located between both horizontal lines, confirm again with button - 3 - and set correct hour with buttons - 2 - and - 4 -.

- Confirm again with button - 3 - and change to minute setting which is done the same as when setting the hour.

- You can leave the menu again with button - 1 -.

- Switch ignition off.